Top 11 Mistakes to Avoid When Installing Textured Wall Panels
Textured wall panels are one of the most popular options for remodeling a plain room into a stunning, modern space. However, reaching a flawless end calls for more than simply sticking panels onto your wall. Even minor mistakes can cause uneven surfaces, loose panels, or a layout that doesn’t look beautiful.
By learning the common mistakes, you can save time, money, and frustration. Whether you’re a DIY enthusiast or operating with a contractor, being prepared is the important thing to achieve proper installation. Let’s explore the common errors people make while installing textured wall panels and the way you could make sure your project goes easily.
Avoid These Common Mistakes While Installing Textured Wall Panels
1. Installing Textured Panels On Unprepared Surface
A smooth surface is necessary for the proper installation of textured wall panels. Panels may not adhere effectively if cracks are not cleaned or filled. Panels may peel over time as a result of dust and dirt weakening the glue.
Eliminate any flaws by sanding or a quick scrape on the wall. A manufacturer’s instruction manual or a simple tutorial can serve as a great help. To prevent a frustrating experience later, ensure to prepare your wall before installation.
2. Guessing The Measurement Without Measuring
Start installation of the panel without measurements might result in panels that don’t fit or leave gaps. Before cutting or adhering to the panels, it is essential to properly measure your wall.
Make sure you double-check your calculations and have a measuring tape ready. A minor error in judgment can ruin the entire process. Making a plan in advance prevents waste and saves time. Ask for assistance or look for a lesson if you’re unsure.
3. Using The Wrong Adhesive
Not every adhesive is made equally. While using an overly powerful adhesive might damage your wall, using a weak one could cause your panels to slide off.
For the best adhesive to use, always refer to the manufacturer’s instructions. Consider the type of wall you’re up against as well. A sticky scenario may be avoided with a little inquiry.
4. Misaligning Wall Panels
Although textured panels are effortless in installation, a small misalignment might ruin the overall style. Before rushing to panel installation, take your time and carefully position them on the wall.
For help, use a level or straight side. Every subsequent panel seems uneven when it begins crookedly. Here, a little perseverance guarantees a polished result.
5. Installing Too Close To Wall Edges
Variations in humidity or temperature can cause materials like fiberboard to expand and compress. Panels may bend or break if they are installed too close to one another or the wall’s edges.
To allow for mobility, leave little spaces at the rims and in between panels. It’s a small step that prevents major problems.
6. Ignoring The Weight Of Wall Panels
Certain textured panels might be heavy, which makes them inappropriate for walls that are weak or cracked. Panels can break away or cause structural damage if the weight is ignored.
Verify the wall’s strength to ensure it can support the weight. Before setting up, strengthen the surface if necessary. Understanding the limits of your wall keeps your project stable and secure.
7. Ignoring Application On A Sample Space
Diving into the installation without first checking out a small part might lead to regret. You must verify that the adhesive is effective, the alignment is accurate, and the arrangement fits your area with a fast test.
It’s similar to trying on clothes before buying them. To prevent loss of time or making mistakes that cannot be undone, spend a bit more time while checking out.
8. Rushing Through The Initial Steps
Although rushing through the preparation process can seem like a time-saver, it sometimes results in more painful results. Uneven panels or a sloppy-looking design might result from cutting corners, skipping procedures, or ignoring information.
So spend some time observing the process, level after level. Without needless remodeling, a systematic approach guarantees a result you’ll be satisfied with.
9. Installing On Moisture Prone Surfaces
Installing textured panels on walls with mold, deteriorating paint, or moisture problems is strictly prohibited. Over time, these issues might cause the panels to shatter since they degrade the glue.
Before you start, always check your partitions for moisture or flaking paint. To ensure that your panels last longer, take care of these issues first. Costly fixes later can be avoided by making a little more effort today.
10. Putting Weight On The Wall Panels
Directly hanging bulky items on textured panels may cause damage or cause them to separate. These panels are ornamental and weren’t always made to support weight.
Be careful with how you arrange your décor and refrain from immediately attaching anything on the panels. You can use wall hooks or anchors positioned throughout the panel regions in such scenarios.
11. Adjustment To Lighting Of The Space
The texture of the panels interacts with light, therefore inadequate layout might result in unwanted shadows or an uneven look. Think about how the wall reacts with both artificial and spontaneous light throughout the day.
Before deciding on the arrangement, test the panels and illumination in your space. Proper positioning enhances the panel’s texture and produces a visually appealing impact.
Wrap Up
Avoiding these mistakes can lead you to a strategic installation of textured wall panels and a beautiful ambiance at home. Always remember to follow the manufacturer’s guidelines for a better understanding of the process. In case of any doubt connect with a manufacturer or an interior decor expert.
You May Also Like: